How To Install A 4 Camera Outdoor Video Surveillance System
Most common home and office installations involve up to 4 cameras for outdoor surveillance. One in the front, back and sides of the house or business. That will give you enough coverage to see most all of your properties.
Here are some of the most common features that are desired by home owners and business owners want to see in an outdoor surveillance system.
The cameras shown here are not just cameras, they have 400 MHz onboard processor with upgradeable firmware so that when the manufacturer designs a new feature, the owner can upgrade his or her camera for free or nominal cost.
This 4 Camera Outdoor Video Surveillance System comes with FREE Internet Viewing. This system uses your existing PC as a DVR to record and playback video on all 4 cameras at the same time in incredible detail. The 4 camera outdoor surveillance system shown here are even better than wireless cameras. Wireless cameras have a tendency to interfere with router and phone systems because they are both using the 2.4Ghz frequency. Sometime the 2.4Ghz outdoor surveillance cameras will actually induce interference in wireless routers and phone systems themselves depending on the strength of the transmission.
These cameras require no transmitter or receiver believe it or not. The electrical circuit in the home or business is acting as the means of video transmission. How is that possible, you say?
It’s done through a technology called HomePlug. HomePlugâ„¢ is the technology that connects devices to each other through the power lines in your home or office. HomePlug-certified products connect PCs and other devices that use Ethernet, USB and 802.11 “Wi-Fi” technologies to the powerline via a HomePlug “bridge” or “adapter.”
In all, this technology provides a simple solution for distributing connectivity around the home without adding any new wires. HomePlug technology is the power behind the 4 Camera Outdoor Video Security System’s incredible ease of setup.
Each Outdoor Camera is connected to a standard electrical outlet. There is no need to configure them or is there a need to install any wireless routers or other networking equipment. Besides the ease of setting up the 4 Camera Outdoor Video Surveillance system, using HomePlug Technology also allows the cameras to pass secure video data over existing power lines to the USB adapter, which then passes the video to the computer.
The quality, detail and ease of installation cannot be matched in any outdoor surveillance system. A true “do-it-yourself’ kit!
Simple installation steps for this Outdoor Surveillance System.
If you don’t have outdoor electrical outlets near where you would like to position your cameras at, put AC outlets in those areas. If you don’t know how to do that simply hire a low voltage electrician or handyman to install them for you at a nominal cost.
1: Install the Werks Software onto the PC that will be your command center.
2: Connect the USB Receiver to the computer that will be you DVR like command center for view and recording surveillance video.
3: Position the Outdoor Camera, mount using brackets included and plug them into an AC outlet.
That’s it! Nothing else. You will then have the best outdoor state-of-the-art outdoor surveillance cameras on the market!
A simple upgrade to what is called the Platinum upgrade available for only $79.95/yr will allow the owner to get more advanced features for the outdoor video surveillance system.
- Desktop Notification
- Digital Pan-Tilt-Zoom
- Online Video Storage
- Remote Search and Playback
- No-Show Alerts
- Password System Lock
- Connection Monitoring
- Remote camera Management
- Online Video Sharing
Explore posts in the same categories: Home Security, Surveillance for Business, Video Surveillance Systems
