SpyGearCo: Spy and Surveillance

How To Install A Wireless Hidden Camera

All of the wireless hidden cameras at this link come with FREE 2.4 GHz receivers and connectors and are very easy to install.

A wireless hidden camera does not need a RCA cable connected from the camera to the TV or VCR. The video signal is transmitted through the open air to the TV or VCR directly, or to a receiver. However, wireless cameras still require power. You can apply power by either using batteries in a battery pack, or by plugging the camera into a regular wall outlet using the AC adaptor.

Some of the wireless hidden cameras have battery packs or holders directly in the hidden camera and all have power adaptors or built-in transmitters. There really isn’t much to the installation for viewing or recording. Most of these cameras are plug and play.

2.4 Ghz wireless cameras require a receiver to pick up the video signal. The receiver in turn is plugged into the TV or VCR with provided RCA cable. 2.4 GHz receivers come with 2.4 GHz cameras and transmitters.

Instructions for Wireless Hidden Camera Installation are as follows:

- Make sure the receiver antenna is in the receiver.

- Attach the receiver to the VCR or TV with the cable.

- Plug the DC 12V adaptor or battery holder into the power jack of the camera.

- Plug the DC 12V adaptor or battery holder into the power jack of the receiver.

- Turn on your TV to start monitoring.

- Make any adjustments to the receiver to get the best reception.

- Watch the TV or attach your VCR and begin recording.

- You should connect the camera to the TV first while you get used to the camera. Then after you’re familiar, connect it to your VCR for recording.

The frequency adjustment knob on the receiver can be changed either going backwards or forwards to get the best picture.

If you want to use a portable receiver-recorder with the hidden camera you will not need the wireless receiver that comes with the camera. Just hang the camera where you want to view and the P-10 Professional Video Receiver/Recorder will lock onto the camera automatically ready for you to view or record!

Remember: You won’t be able to buy a hidden camera with audio, since it is a Federal Law that makes it available only to law enforcement agencies.     

How To Install A Wired Hidden Camera

A wired camera needs a cable that goes from the camera to a TV or VCR. The video signal is passed from the camera, through the cable, and to your TV or VCR which allows you to see the picture. All wired cameras must have a RCA cable to connect the camera to the TV or VCR. Instructions for Wired Hidden Camera Installation are as follows:

The Lukwerk Hidden Camera enable homeowners and small business owners alike to install an entire system in less than 30 minutes. Using your Windows PC as the control station, you install a professional-grade system with no training, no ladders, no drills, and no new wires. Follow these easy steps to install the starter kit. 1.) Install the Werks Software
From the LukWerks CD you install the powerful Windows® Software, take an online tour, read the User Guide, or review the Software License and Hardware Warranty. During the installation process, the Werks Installer will guide you through each step of the setup.

2.) Connect the USB Receiver
Plug the Luk USB Receiver into a wall outlet and connect to a USB port on your PC. The receiver transfers secure digital video from the SecureIP Cameras to the Werks Software on your PC.

3.) Position the SecureIP Camera
Simple plug in camera at desired viewing angle. That’s it!

4.) Register for FREE Internet Viewing
To access free remote viewing, you create an account at a free designated website. From your account you can register several sites where you have installed a SecureIP system – your home, your business, your second home, or even the home of your aging parents. With remote viewing, you have anywhere anytime access to live video from compatible cell phones and Internet browsers.

All Hidden Camera Gadgets come with RCA Connector Cables. 

All wired cameras require RCA cable to connect the camera to a TV or VCR. Cameras with a description that it is wired for Plug and Play Connection have two leads coming out of the camera. One of these leads is for power. A power supply is provided to plug into a regular wall outlet. The other lead is a RCA video connection to connect to your TV or VCR. The video connection is a female connection and additional RCA cable must be obtained to connect to your TV or VCR. All Hidden Cameras come with this cable.

Bookmark this story so others can enjoy it:
              

Explore posts in the same categories: Hidden Cameras, Video Surveillance Systems

This entry was posted on Monday, June 4th, 2007 at 12:27 pm and is filed under Hidden Cameras, Video Surveillance Systems. You can subscribe via RSS 2.0 feed to this post's comments. You can comment below, or link to this permanent URL from your own site. Your comment will appear immediately, but I reserve the right to delete innapropriate comments.